Solenoid Actuator Installed On Cylinder Non Corrosive NOVEC 1230 Fire Suppression System

Solenoid Actuator Installed On Cylinder Non Corrosive NOVEC 1230 Fire Suppression System

Description

The Solenoid Actuator with electric and manual mechanical operation functions:

1. Electric operation: When the control system sends instructions to the electromagnet, the electromagnet generates a magnetic force, overcomes the spring force to open the valve and release the fire extinguishing agent.

2. Manual operation: In case of fire, if the air fire extinguishing control system fails, you can enter the cylinder room, find the corresponding drive cylinder group in the fire protection area, pull out the safety clip, tap the handle to lower the top knife, open the container valve, and start the fire extinguishing system to extinguish the fire. However, please note that only the pipe network system has this mechanical emergency start operation mode, prefabricated fire extinguishing system because the fire extinguishing device is in the protected area, it is dangerous to enter the protected area in the event of fire, generally cannot perform this operation.

Components

Parameter

Package

Each accessory will be plastic sealed, individually packaged, and finally packing in the cartons.